PowerFlex R660 appliance Base | HyperConverged, SW GPU capable, SAS/SATA, No SDPM | Intel® Xeon® Gold 6448Y 2.1G, 32C/64T, 16GT/s, 60M Cache, Turbo, HT (225W) DDR5-4800 x 2 | Performance Heatsink for 2 CPU configuration (CPU less than 250W) | 4 Very High Performance Fans | 32GB RDIMM, 4800MT/s Dual Rank - HCI x 16 | 2.5" Chassis with up to 10 Hard Drives (SAS/SATA), 2CPU, PERC11 | C1, No RAID for HDDs/SSDs (Mixed Drive Types Allowed) | HBA355i with rear load bracket | 1.92TB SSD SAS, RI, up to 24Gbps 512e 2.5in Hot-Plug, AG Drive x 10 | Riser Config 2, Low Profile 3x16 LP Slots (2xLP Gen5 + 1xLP Gen4) | Broadcom 57414 Dual Port 10/25GbE SFP28, OCP NIC 3.0 | Broadcom 57414 Dual Port 10/25GbE SFP28 Adapter, PCIe Low Profile, V2 | Dual,Fully Redundant(1+1),Hot-Plug PSU,1800W MM HLAC(ONLY FOR 200-240Vac)Titanium,C16 Connector | Jumper Cord - C14/C15, 2M, 250V, 10A (AP, China, Korea) x 2 | Bezel - PowerFlex 1U | ReadyRails Sliding Rails Without Cable Management Arm or Strain Relief Bar | BOSS-N1 controller card + with 2 M.2 960GB (RAID 1) | iDRAC9, Enterprise 16G | Trusted Platform Module 2.0 V3 | Dell Networking, Transceiver, 25GbE SFP28 SR, No FEC, MMF, Duplex LC x 4 | PowerFlex, TB, Node License, Tier A, =CB x 18 | ProSupport Plus Mission Critical PowerFlex Node TB Tier A Sftwr Spt-Maint, 36 Month(s) x 18 | PowerFlex, SDS, Node License, Tier A, =ID | ProSupport Plus Mission Critical PowerFlex Node SDS Tier A Sftwr Spt-Maint, 36 Month(s) | Motherboard supports ALL CPUs and is required for CPUs 250W and above | ProSupport Plus and 4Hr Mission Critical, 36 Month(s) | Keep Your Hard Drive For Enterprise, 36 Month(s) | ProDeploy Plus for PowerFlex appliance