Features: • Independent HP supply to each diver with an indicating gauge ranging from 0-5000 PSIG and shut off valve to monitor and switch from one high pressure source to the other • Common LP supply to both divers with an indicating Gauge range from 0-500 PSIG and shut off valve to another • Check valves provide protection against back flow of air from a full tank into an empty tank when switching high pressure tanks • High pressure air is reduced to low pressure via a Pressure Tech regulator • Regulator input is protected against contamination by a 60 micron lter • Relief valve (factory set at 250 PSIG) prevents over pressurization • Gauge protectors such a Chem quip and isolation valve are provided for each 4.5’’ Pneumo gauge Air Control Specications: HP Supply Pressure: 200 Bar HP Inlet Valve: 3 LP Inlet Valve: 2 HP Regulator Outlet: 0 - 35 Bar HP Regulator Max Inlet: 0 - 300 Bar HP In-line Filter: 60 micron LP Relief Valve: Set 250 PSIG LP Output Fitting: #6 JIC / #8 JIC / 0₂ LP/HP Inlet Fitting: #6 JIC / #8 JIC / 0₂ Pneumo Outlet Fitting: #4 JIC Weight: 36 kg Dimension: 678 x 495 x 439 mm Included: • 25 metres x 3 Part Diving Umbilicals P/N: UDA0103 terminated with Connectors & Fittings, Carabiner & D-Ring. (Air/Pneumo/Communication)